Changzhou Longquan Solar Energy Manufacture Factory

Vacuum Tube

Click to enlarge image

Super three target vacuum tube assimilate the advanced 12 layers of spattering deposition of trivalent element technology to make the tube has high performance of absorptance and low reflection ratio. The solar tube is made from borosilicate glass 3. 3 and the structure of solar vacuum tubes is as same as the gallbladder of the pot, which is sealed with double glass and the double glass tube is pumped into a high-vacuum. The surface of inner glass is sprayed with selective coating through a special technology. The solar energy absorption rate can reach 96 percent by the usage of the selective coating, while the rate of thermal radiation below 4 percent. Vacuum tube absorbs solar energy, and then heats the water or liquid by heat conduction. The heat loss of liquid is very low through the high-vacuum between inner glass tube and outside, Its stagnation temperature is above 270 degrees. It is widely used in solar water heater, solar collecotor, solar projects. It can works in cloundy days. Specification Outer Diameter and Inner Diameter (MM) 47 / 37 58 / 47 Length of Tube (MM) 1500, 1600, 1800, 2100 Thickness of Tube (MM) 1. 60 more or less 0. 15 Selective absorbing surface: 3layers, aluminum-nitrogen-carbon (Al-SS -CU) vcuum :P��짖��짚5*10-3pa Material: Borosilicate glass 3. 3 Color: Blue Or Black Thermal Expansion: 3. 3 multiply 10-6 / k Maximum Strength: 0. 6 Mpa Absorption of Selective Coating: above 96 percent Emission of Selective Coating: below 4 percent Stagnation Temperature: above 270-300 degrees / KW Solar Irradiation for Water Temperature Rise below 3. 0mj / m2 Coefficient of Average Heat Loss below 0. 70w / (m2 degree) Vacuum above 3. 0 multipy 10-2Pa (anti heat loose) Bearing hailstone ability 25mm

Picture Gallery | List View

Total 4 Products

Select All | Clear All

Evacuated Tube
(LQ-081)

Evacuated Glass Tube

Vacuum Tube 02

Vacuum Tube Sample
(LQ-08)